KYKYK 15/20W Thick Copper Mouth Natural Gas Booster Pump Methane Pressurizer Pressure Adjustable Water Heater Gas Booster Pump for Beginners(15W Adjustable)

15/20W Thick Copper Mouth Natural Gas Booster Pump Methane Pressurizer Gas Booster Pump for Pressure Adjustable Water Heater product parameter Product Model: JXL-20 Nozzle Diameter: 10mm Supply voltage: 220/50H Maximum pressure: 25Kpa Rated power: 20W Maximum flow rate: 40L/min Product weight: 1.45 kg Product volume: 18*11*8 (length, width and height) installation tips 1. This product is a non-automatic model.When the switch is on, the air pump works and when the switch is off, the air pump stops working. (Reminder: when you do not need to pressurize, you should turn off the switch in time, and the air pump will be in idle state for a long time, which will lead to greater loss in the engine.) 2. When the air pump is not connected, the sound is loud, but after connecting the pipe and placing a towel or soft cushion under the machine, the sound will be greatly reduced and have a shock absorption effect. 3. The location of the pump installation is more than 1 meter away from the fire source.The two ends of the pump must be connected to a flexible gas pipe.More than 2 hours. 4. Keep the pump body clean.Do not allow foreign objects to enter the pump body.Keep good ventilation and stay away from heat sources during use.Do not cover the pump with any objects.If the air pressure is too low, check if the pump is blocked. 5. If you need to detect leaks, you can use soapy water or detergent mixed with water to rub both sides of the fuselage to check.The product will not ignite spontaneously if it is not near an open flame.Remember not to use an open flame test.

• Nozzle Diameter: 10mm
• Supply voltage: 220/50H
• Maximum pressure: 25Kpa
• Rated power: 20W
• Maximum flow rate: 40L/min